Choose Language

Your Favorites

  • OLYMPIC<sup>®</sup> ELITE Solid 🇺🇸

OLYMPIC® ELITE Solid 🇺🇸

Olympic ELITE: A premium wood stain and sealant. This solid wood stain adds a rich, opaque stain color while still allowing the texture of the wood to show. This super-premium exterior wood stain is formulated to protect and enhance the natural look of wood while providing protection and beauty through all seasons with a powerful mold, mildew, and algae-resistant finish. All are backed by a lifetime guarantee.

  • Not available in the Canadian market
  • Our Best Lifetime Results, Guaranteed*
  • A rich, durable exterior wood stain finish that accentuates wood textures and provides beautiful color
  • This exterior wood stain has Four Season protection package that delivers a urethane-fortified formula for toughness against cracking and peeling, enhanced waterproofing protection, and a powerful mold, mildew, and algae-resistant finish
  • A wood stain that is excellent for all wood types, including exotic hardwoods
  • Low VOC, water-based wood stain formula gives off less odor and harmful fumes as wood dries    
  • A lifetime of durability and beauty




*See back label for instructions
Read more
Select a wood stain color above to buy online
Find a Retailer

Product Features

Waterproofing Protection

Olympic® Elite™ wood stain penetrates and protects your deck from water damage and protects against mold, mildew and algae growth.

4 Season Protection

Olympic® Elite™ expands and contracts to resist peeling and cracking in cold climates and protects from fading in sunny climates.

Our Best Protection

Olympic® Elite™ provides rich penetrating stain color that resists color fade year after year. Backed by a Lifetime Guarantee.

Stain in 4 Easy Steps

Wood Staining - Step 1 )

How Much Wood Stain Do I Need?

Use our Stain Calculator. The size of your project will determine how much wood stain is needed. Remember, solid color wood stains require two coats.
Wood Staining - Step 2)

Clean Your Deck Or Patio

Sweep debris from your deck, then use Olympic Premium Deck Cleaner to wash away dirt and stains caused by mildew. See these How To Stain Wood articles for other staining projects.
Wood Staining - Step 3)

Prep Your Wood Surface

Tape off the surfaces of your deck or patio you don't want stained. Avoid staining in direct sunlight so the wood stain does not dry unevenly. Then get ready to apply wood stain!
Wood Staining - Step 4)

Apply Wood Stain

For even coverage, apply the wood stain to one board at a time. For best results, backbrush into the wood surface.
Refer to the Product Label, Technical Data Sheet (TDS) or Safety Data Sheet (SDS) for safety and detailed application instructions.

Wood Stain Transparency Guide

Clear Wood Finishes

Clear wood finishes & wood stains allow your wood to weather and gray naturally. Least protection, most woodgrain.

Transparent / Toner

Transparent wood stains add a slight hint of color that highlights the wood grain. Less protection, more woodgrain.

Semi-Transparent Stain

Semi-transparent wood stains provide rich color that allows wood grain and texture to show. More protection, less woodgrain.

Semi-Solid Stain

Semi-solid stains give the same rich color as semi-transparent, but hides more wood grain. More protection, least woodgrain.

Solid Color Stain

Solid Color Stain​ covers the woodgrain and accentuates the natural texture. Most protection, no woodgrain.

Deck Resurfacer

A deck resurfacer creates a new, safe, durable surface on worn or weathered wood or concrete.

Coverage

One gallon or 3.78 Liters covers approximately 250 to 350 sq. ft. or 23.2 to 32.5 sq. meters depending on application, wood texture and porosity.

Drying Time

Normally dries in 24 hours when applied in optimal temperatures of 50°F to 85°F or 10°C to 29°C. Application in high humidity or in temperatures below 50°F or 10°C may prolong drying times. Allow 24 to 48 hours of drying time before light foot traffic or replacing furniture.


Drying times may vary depending on temperature, humidity, film build, color and air movement.

Cleanup

Clean brushes and tools with mineral spirits for <600 g/L VOC version and with soap and water for <100 g/L VOC version.

Product Warning

Contact your local environmental regulatory agency for guidance on disposal of unused product. Do not pour down a drain or storm sewer.

Product Warning

Please refer to the Product Label, Technical Data Sheet (TDS) or Safety Data Sheet (SDS) for safety and detailed application instructions.

Code Finish Base Sizes Download
80301 Solid/Opaque Stain - Tint Base Gallon/3.78 L (01), 1/2 Pint/236 mL (16), 3 Gallons/11.3 L (03)
80301 N/A N/A 5 Gallons/18.9 L (05)
80302 Solid/Opaque Stain - Tint Base Gallon/3.78 L (01), 1/2 Pint/236 mL (16), 3 Gallons/11.3 L (03)
80302 N/A N/A 5 Gallons/18.9 L (05)