Wood Protector Waterproofing Sealant Clear

Backed by the Good Housekeeping Seal: Olympic Wood Protector. A durable, clear waterproofing sealant that allows wood to weather and gray naturally.

Penetrating oil formula for durability and protection
Waterproofing protection
SunBlock^® UV defense
Exclusive Scuff Guard^® technology
Provides a mildew-resistant coating
Backed by the Good Housekeeping Seal

Select a wood stain color above to buy online

Find a Retailer

Stain in 4 Easy Steps

Wood Staining - Step 1 )

How Much Wood Stain Do I Need?

Use our Stain Calculator. The size of your project will determine how much wood stain is needed. Remember, solid color wood stains require two coats.

Wood Staining - Step 2)

Clean Your Deck Or Patio

Sweep debris from your deck, then use Olympic Premium Deck Cleaner to wash away dirt and stains caused by mildew. See these How To Stain Wood articles for other staining projects.

Wood Staining - Step 3)

Prep Your Wood Surface

Tape off the surfaces of your deck or patio you don't want stained. Avoid staining in direct sunlight so the wood stain does not dry unevenly. Then get ready to apply wood stain!

Wood Staining - Step 4)

Apply Wood Stain

For even coverage, apply the wood stain to one board at a time. For best results, backbrush into the wood surface.
Refer to the Product Label, Technical Data Sheet (TDS) or Safety Data Sheet (SDS) for safety and detailed application instructions.

Wood Stain Transparency Guide

Clear Wood Finishes

Clear wood finishes & wood stains allow your wood to weather and gray naturally. Least protection, most woodgrain.

Transparent / Toner

Transparent wood stains add a slight hint of color that highlights the wood grain. Less protection, more woodgrain.

Semi-Transparent Stain

Semi-transparent wood stains provide rich color that allows wood grain and texture to show. More protection, less woodgrain.

Semi-Solid Stain

Semi-solid stains give the same rich color as semi-transparent, but hides more wood grain. More protection, least woodgrain.

Solid Color Stain

Solid Color Stain covers the woodgrain and accentuates the natural texture. Most protection, no woodgrain.

Deck Resurfacer

A deck resurfacer creates a new, safe, durable surface on worn or weathered wood or concrete.

Area Preparation

Coatings and contaminants must be completely removed from the surface. Clean with the appropriate Olympic cleaner prior to applying product.

WARNING! If you scrape, sand, or remove old paint, you may release lead dust or fumes. LEAD IS TOXIC. EXPOSURE TO LEAD DUST OR FUMES CAN CAUSE SERIOUS ILLNESS, SUCH AS BRAIN DAMAGE, ESPECIALLY IN CHILDREN. PREGNANT WOMEN SHOULD ALSO AVOID EXPOSURE. Wear a properly fitted NIOSH-approved respirator and prevent skin contact to control lead exposure. Clean up carefully with a HEPA vacuum and a wet mop. Before you start, find out how to protect yourself and your family by contacting USEPA National Lead Information Hotline at 1-800-424-LEAD or log on to www.epa.gov/lead. Follow these instructions to control exposure to other hazardous substances that may be released during surface preparation.

Coverage

One gallon covers approximately 150 to 350 sq. feet (13.9 to 32.5 sq. meters) depending on wood texture and porosity.

Application Details

Test a small area to ensure acceptable appearance and penetration. Apply one thin coat with a high-quality brush, roller or paint pad or by spray equipment. When spraying or rolling, always back brush for best results.

Drying Time

Normally dries in 24 hours when applied at 50°F to 85°F.

Cleanup

Clean brushes and tools with mineral spirits for 550 g/L VOC version and with soap and water for 100 g/L VOC version.

Product Warning

Please refer to the Product Label, Technical Data Sheet (TDS) or Safety Data Sheet (SDS) for safety and detailed application instructions.

Code	Sizes	Download