OLYMPIC^® ASCENT^™ Exterior Semi-Transparent Stain + Sealant 🇨🇦

A penetrating acrylic/oil formula that stains and seals wood to offer great protection against water damage, UV rays, scuffs and provides a mildew-resistant coating.

OLYMPIC^® ASCENT^™ is exclusively sold at The Home Depot

Product only available in Canada
Penetrating, acrylic/oil formula offers great protection
Stain + Sealant in One protects and beautifies in one step
Enhanced waterproofing protection
Advanced SunBlock^® UV defense ensures long lasting, beautiful color
Exclusive Scuff Guard^® technology protects the surface
Provides a mildew resistant coating
Weather-Ready^® Application – allows greater opportunities for staining. You can clean and stain on the same day, even after rain. Read more here.

Select a wood stain color above to buy online

Find a Retailer

Stain in 4 Easy Steps

Wood Staining - Step 1 )

How Much Wood Stain Do I Need?

Use our Stain Calculator. The size of your project will determine how much wood stain is needed. Remember, solid color wood stains require two coats.

Wood Staining - Step 2)

Clean Your Deck Or Patio

Sweep debris from your deck, then use Olympic Premium Deck Cleaner to wash away dirt and stains caused by mildew. See these How To Stain Wood articles for other staining projects.

Wood Staining - Step 3)

Prep Your Wood Surface

Tape off the surfaces of your deck or patio you don't want stained. Avoid staining in direct sunlight so the wood stain does not dry unevenly. Then get ready to apply wood stain!

Wood Staining - Step 4)

Apply Wood Stain

For even coverage, apply the wood stain to one board at a time. For best results, backbrush into the wood surface.
Refer to the Product Label, Technical Data Sheet (TDS) or Safety Data Sheet (SDS) for safety and detailed application instructions.

Wood Stain Transparency Guide

Clear Wood Finishes

Clear wood finishes & wood stains allow your wood to weather and gray naturally. Least protection, most woodgrain.

Transparent / Toner

Transparent wood stains add a slight hint of color that highlights the wood grain. Less protection, more woodgrain.

Semi-Transparent Stain

Semi-transparent wood stains provide rich color that allows wood grain and texture to show. More protection, less woodgrain.

Semi-Solid Stain

Semi-solid stains give the same rich color as semi-transparent, but hides more wood grain. More protection, least woodgrain.

Solid Color Stain

Solid Color Stain covers the woodgrain and accentuates the natural texture. Most protection, no woodgrain.

Deck Resurfacer

A deck resurfacer creates a new, safe, durable surface on worn or weathered wood or concrete.

Application Details

Warranty

Guaranteed to prevent water damage and graying for a minimum of six (6) years on decks and eight (8) years on fences and siding.

Coverage

One gallon covers approximately 250 to 350 sq. feet or 23.2 to 32.5 sq. meters depending on wood texture and porosity.

Area Preparation

Coatings and contaminants must be completely removed from the surface. Clean with the appropriate Olympic^® cleaner prior to applying product.

WARNING! If you scrape, sand, or remove old paint, you may release lead dust or fumes. LEAD IS TOXIC. EXPOSURE TO LEAD DUST OR FUMES CAN CAUSE SERIOUS ILLNESS, SUCH AS BRAIN DAMAGE, ESPECIALLY IN CHILDREN. PREGNANT WOMEN SHOULD ALSO AVOID EXPOSURE. Wear a properly fitted NIOSH-approved respirator and prevent skin contact to control lead exposure. Clean up carefully with a HEPA vacuum and a wet mop. Before you start, find out how to protect yourself and your family by contacting USEPA National Lead Information Hotline at 1-800-424-LEAD or log on to www.epa.gov/lead. Follow these instructions to control exposure to other hazardous substances that may be released during surface preparation.

Application

Test a small area to ensure acceptable appearance and penetration. Apply one thin coat with a high-quality brush, roller or paint pad or by spray equipment. When spraying or rolling, always back brush for best results.

Application Temperature

Can be applied down to 2°C (35°F).

Drying Time

Normally dries in 24 hours when applied at 10°C (50°F) to 29°C (85°F). Drying times listed may vary depending on temperature, humidity, color and air movement.

Cleanup

Clean brushes and tools with soap and water.

Warning

Please refer to the Product Label, Technical Data Sheet (TDS) or Safety Data Sheet (SDS) for safety and detailed application instructions.

Code	Finish	Base	Sizes	Download
795601C	Semi-Transparent	Stain - Tint Base	Gallon/3.78 L (01), 5 Gallons/18.9 L (05)
795611C	Semi-Transparent	Stain - Tint Base	Gallon/3.78 L (01)
7956211C	Semi-Transparent	Stain - Custom Color	Gallon/3.78 L (01)

OLYMPIC® ASCENT™ Exterior Semi-Transparent Stain + Sealant 🇨🇦